Set Rmon - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The parameter has the following meaning:

The entry is deleted.

set rmon

With this command, you enable / disable the remote monitoring function.

You are in the Global Configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

set rmon {enable|disable}

The parameters have the following meaning:

The remote monitoring function is enabled or disabled.

Further notes

You can display the status of this function and other information with the

Number of the event entry to be deleted

Enables the remote monitoring function

Disables the remote monitoring function

Default: disabled

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Range of values

Scalance xr-500