Syntax
Call up the command with the following parameters:
snmp targetaddr<TargetAddressName>
The parameters have the following meaning:
Parameters
TargetAddressName
Result
The SNMP target address is deleted.
Further notes
You change the SNMP target address with the
You display the SNMP target address with the
7.4.2.14
snmp targetparams
Description
With this command, you configure the SNMP target parameters.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp targetparams <ParamName>
The parameters have the following meaning:
Parameter
ParamName
user
UserName
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Description
SNMP target address
user <UserName>
security-model {v1|v2c|v3{auth|noauth|priv}}
message-processing {v1|v2c|v3}[{volatile|nonvolatile}]
Description
Name of the SNMP parameter
Keyword for the user name
Value for the user name
Range of values
max. 32 characters
command.
snmp targetaddr
show snmp targetaddr
Range of values
max. 32 characters
-
max. 32 characters
Network protocols
7.4 SNMP
command.
287