Network structures
6.3 Spanning Tree
6.3.6.1
instance
Description
With this command, you assign a range of VLANs to an MST instance.
Requirement
You are in the MSTP configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call up the command with the following parameters:
instance <instance-id(1-64)> vlan <vlan-range>
The parameters have the following meaning:
Parameter
instance-id
vlan-range
Result
The range of VLANs is assigned to the MST instance.
Further notes
You cancel the assignment of the VLAN to an MST instance with the
You delete the MST instance with the
You display this setting and other information with the
configuration
224
Description
Number of the instance
Range of VLANs assigned to an
instance
command.
Range of values
1 ... 64
Default:
The VLANs 1 – 4094 are assigned to
instance "0"
enter the range limts with a hyphen or
blank
command.
no instance
show spanning-tree mst
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.
no instance