Dot1X Mac-Auth Vlan-Assign; No Dot1X Mac-Auth Vlan-Assign - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.7 Port Based Network Access Control
The parameters have the following meaning:
Parameter
mac
aa:aa:aa:aa:aa:aa
Result
MAC authentication is reset for the port.
11.7.5.10

dot1x mac-auth vlan-assign

Description
With this command you enable the assignment of the VLAN ID for a MAC address by the
RADIUS server.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
dot1x mac-auth vlan-assign
Result
The VLAN ID for a MAC address is assigned by the RADIUS server.
11.7.5.11

no dot1x mac-auth vlan-assign

Description
With this command you disable the assignment of the VLAN ID for a MAC address by the
RADIUS server.
Requirement
You are in the Interface configuration mode.
536
Description
Keyword for a MAC address
MAC address of the interface
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of
values
-
aa:aa:aa:aa:a
a:aa