Network protocols
7.4 SNMP
You display the created SNMP groups with the
You display the created SNMP user with the
7.4.2.9
no snmp group
Description
With this command, you delete the details of an SNMP group.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp group <GroupName> user <UserName>security-model{v1|v2c|v3}
The parameters have the following meaning:
Parameter
GroupName
user
UserName
security-model
Result
The details of the group are deleted.
Further notes
You change the details of an SNMP group with the
You display the created SNMP groups with the
You display the created SNMP user with the
282
Description
Name of the group
Keyword for the user name
Name of the user
Specifies which security settings are used for sending
command.
show snmp group
command.
show snmp user
command.
snmp group
command.
show snmp group
command.
show snmp user
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
max. 32 characters
-
max. 32 characters
•
v1
•
v2c
•
v3