Configuration
3.1 System
Result
The status and the configuration of the selected interfaces are displayed.
3.1.1.8
show interfaces ... counters
Description
This command shows the counters of one, several or all interfaces.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show interfaces
The parameters have the following meaning:
Parameters
interface-type
interface-id
vlan
vlan-id
For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 30)".
If you do not select any parameter from the parameter list, the entries are displayed for all
available counters.
Result
The counters of the selected interfaces are displayed.
46
or
cli#
[{<interface-type><interface-id>]|{vlan<vlan-id(1-4094)>}]counters
Description
Type or speed of the interface
Slot no. and port no. of the interface
Keyword for a VLAN connection
Number of the addressed VLAN
Range of values
•
gigabitethernet
•
extreme-ethernet
Enter a valid interface name
-
1 ... 4094
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07