Syntax
Call the command without parameters:
ip echo-reply
Result
ICMP echo reply messages are enabled.
Further notes
You disable the setting with the
You can display the setting of this function and other information with the
information
7.1.11.6
no ip echo-reply
Description
With this command, you disable the ICMP echo reply messages.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip echo-reply
Result
ICMP echo reply messages are disabled.
Further notes
You change the setting with the
You can display the setting of this function and other information with the
information
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
no ip echo-reply
command.
ip echo-reply
command.
command.
command.
Network protocols
7.1 IPv4 protocol
show ip
show ip
243