Table of Contents
Advertisement
Parameter
Waiting for Space
Entries
Flow Insertion Count.
Flow Deletion Count.
Insertion Failure Count. Total number of hardware insertion attempts that were
When the switch groups parameter is given, the following information is
displayed:
Parameter
Group Type
Group Id
Reference Count
Duration
Bucket Count
Reference Group Id
When the switch flows parameter is selected, the following output is shown:
Parameter
Flow Type
Flow Table
Flow Priority
Match Criterion
Ingress Port
Description
Number of entries that are not currently in the hardware
because the attempt to insert the entry failed.
Total number of flows that were added to this table since
the switch powered up.
Total number of flows that were deleted from this table
since the switch powered up.
rejected due to lack of space since the switch powered up.
Description
Type of Group: Indirect, All, Select, etc.
Unique ID for the Group
This count indicates how many Select groups are referring
to the current Indirect group. Reference Count is used
only for Indirect groups.
The time since the group was created.
Number of Buckets in the group.
References the Indirect group ID and used for Select
group only.
Description
Type of the Flow 1.0 Flow or Layer 2 Match etc.
The hardware table where the flow is installed.
Priority of the flow versus other flows. Higher is better.
The match criterion specified by the flow with the field
and value like ingress port or ether type
The port on which the flow is active.
Data Center Technology Commands
1173
Advertisement
Table of Contents
