Advertisement
For two or more devices to be in the same MST region, they must have the same VLAN
mapping, the same configuration revision number, and the same name.
Example
The following example maps VLANs 10-20 to MST instance 1.
Console(config)# spanning-tree mst configuration
Console(config-mst)# instance 1 add vlan 10-20
name (mst)
The name
Configuration mode command defines the configuration name. To return to the
MST
default setting, use the no form of this command.
Syntax
name string
•
string—MST configuration name. Case-sensitive (Range: 1-32 characters).
Default Setting
The default name is a bridge ID.
Command Mode
MST Configuration mode
User Guidelines
•
There are no user guidelines for this command.
Example
The following example defines the configuration name as region1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # name region 1
revision (mst)
The revision
configuration command defines the configuration revision number. To return to
MST
the default configuration, use the no form of this command.
Syntax
revision value
no revision
•
value — Configuration revision number (Range: 0 - 65535).
Spanning-Tree Commands
259
Advertisement
