Show Span Session - Cisco MDS 9000 series Command Reference Manual

show span session

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show span session
To display specific information about a Switched Port Analyzer (SPAN) session, use the show span
session command.
Syntax Description session-id
brief
Defaults
None.
Command Modes
EXEC mode.
Command History Release
1.2(1)
Usage Guidelines None.
Examples
The following example displays SPAN sessions in a brief format.
switch# show span session brief
--------------------------------------------------------
Session
--------------------------------------------------------
7
The following example displays a specific SPAN session details.
switch# show span session 7
Session 7 (active)
Cisco MDS 9000 Family Command Reference
22-310
show span session [session-id [brief] | brief]
Specifies the SPAN session ID. The range is 1 to 16.
Displays SPAN session configuration in brief format.
Modification
This command was introduced.
Admin Oper
State State
no suspend active
Destination is fc2/7
No session filters configured
No ingress (rx) sources
Egress (tx) sources are
port-channel 7,
Destination
Interface
fc2/7
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands