Auto Qos Classify - Cisco Catalyst 3560-X Command Reference Manual

auto qos classify

auto qos classify
Syntax Description
Defaults
Table 2-2 Auto-QoS Configuration for the Egress Queues
Egress Queue
Priority (shaped)
SRR shared
SRR shared
SRR shared
Command Modes
Command History
Catalyst 3750-X and 3560-X Switch Command Reference
2-52
Downloaded from www.Manualslib.com
Use the auto qos classify interface configuration command to automatically configure quality of service
(QoS) classification for untrusted devices within a QoS domain. Use the no form of this command to
return to the default setting.
auto qos classify [police]
no auto qos classify [police]
police (Optional) Configure QoS policing for untrusted devices.
Auto-QoS classify is disabled on the port.
When auto-QoS is enabled, it uses the ingress packet label to categorize traffic, to assign packet
labels, and to configure the ingress and egress queues
Table 2-1 Auto-QoS Configuration for the Ingress Queues
Ingress Queue Queue Number
1
SRR shared 1
Priority 2
1. SRR = shaped round robin. Ingress queues support shared mode only.
Queue Number CoS-to-Queue Map
1 4, 5
2 2, 3, 6,7
3 0
4 1
Interface configuration
Release Modification
12.2(55)SE This command was introduced.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Queue Weight
CoS-to-Queue Map (Bandwidth)
0, 1, 2, 3, 6, 7 70 percent
4, 5 30 percent
Queue (Buffer) Size
Queue Weight for Gigabit-Capable
(Bandwidth) Ports
up to 100 percent 25 percent
10 percent 25 percent
60 percent 25 percent
20 percent 25 percent
Queue (Buffer)
Size
90 percent
10 percent
Queue (Buffer)
Size for 10/100
Ethernet Ports
15 percent
25 percent
40 percent
20 percent
OL-21522-02