Cisco MDS 9000 series Command Reference Manual page 1259

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Usage Guidelines If the running configuration is different from the startup configuration, issue the show startup-config
diff command to view the differences.
Examples
The following example displays the configuration currently running on the switch.
switch# show running-config
Building Configuration ...
interface fc1/1
interface fc1/2
interface fc1/3
interface fc1/4
interface mgmt0
ip address 172.22.95.112 255.255.255.0
no shutdown
vsan database
boot system bootflash:isan-237; sup-1
boot kickstart bootflash:boot-237 sup-1
callhome
ip default-gateway 172.22.95.1
switchname switch
trunk protocol enable
username admin password 5 /AFDAMD4B2xK2
The following example displays the difference between the running configuration and the startup
configuration.
switch# show running-config diff
Building Configuration ...
*** Startup-config
--- Running-config
****************** 1,16 ****
fcip enable
ip default-gateway 172.22.91.1
iscsi authentication none
iscsi enable
! iscsi import target fc
iscsi virtual-target name vt
all-initiator-permit
--- 1,20 ----
fcip enable
+ aaa accounting logsize 500
+
+
+
ip default-gateway 172.22.91.1
iscsi authentication none
iscsi enable
! iscsi initiator name junk
iscsi virtual-target name vt
OL-8413-07, Cisco MDS SAN-OS Release 3.x
pWWN 21:00:00:04:cf:4c:52:c1
pWWN 21:00:00:04:cf:4c:52:c1
role network-admin
Cisco MDS 9000 Family Command Reference
show running-config
22-285