Configuring Periodic Inventory Notification; Disabling Duplicate Message Throttle; Enabling Or Disabling Call Home - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Periodic Inventory Notification

This example shows how to configure the e-mail options for Call Home messages:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# transport email smtp-server 192.0.2.10 use-vrf Red
switch(config-callhome)# transport email from person@example.com
switch(config-callhome)# transport email reply-to person@example.com
Configuring Periodic Inventory Notification
You can configure the switch to periodically send a message with an inventory of all software services currently
enabled and running on the device along with hardware inventory information. The switch generates two Call
Home notifications; periodic configuration messages and periodic inventory messages.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
This example shows how to configure the periodic inventory messages to generate every 20 days:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# periodic-inventory notification interval 20

Disabling Duplicate Message Throttle

You can limit the number of duplicate messages received for the same event. By default, the switch limits the
number of duplicate messages received for the same event. If the number of duplicate messages sent exceeds
30 messages within a 2-hour time frame, then the switch discards further messages for that alert type.
Command
switch(config-callhome)# no duplicate-message
throttle

Enabling or Disabling Call Home

Once you have configured the contact information, you can enable the Call Home function in callhome
configuration mode.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
360
Command or Action
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)#
periodic-inventory notification [interval
days] [timeofday time]
switch# show callhome
switch# copy running-config
startup-config
Configuring Smart Call Home
Purpose
Enters configuration mode.
Enters callhome configuration mode.
Configures the periodic inventory messages. The
interval range is from 1 to 30 days. The default is
7 days. The timeofday value is in HH:MM format.
(Optional)
Displays information about Call Home.
(Optional)
Saves this configuration change.
Purpose
Disables duplicate message throttling for Call Home.
Enabled by default.
OL-16597-01