Enabling The Rrpp Protocol; Optional) Creating A Rrpp Ring Group - Huawei Quidway S6700 series Configuration Manual

Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability
The RRPP ring is enabled.
----End

3.4.9 Enabling the RRPP Protocol

To activate an RRPP ring, you must enable RRPP and the RRPP ring.
Context
Do as follows on all switches in the RRPP domain:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rrpp enable
The RRPP protocol is enabled.
----End

3.4.10 (Optional) Creating a RRPP Ring Group

To reduce the Edge-Hello packets to be sent and received, you can add a group of sub-rings with
the same edge nodes or assistant edge nodes to an RRPP ring group.
Context
Do as follows on the edge node or assistant edge node:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rrpp ring-group ring-group-id
An RRPP ring group is created.
The ring group can be only created on edge nodes or assistant edge nodes.
In an RRPP ring group, the nodes of all sub-rings must have the same type. That is, all of them
must be all edge nodes or assistant edge nodes.
Step 3 Run:
domain domain-id ring { ring-id1 [ to ring-id2 ] } &<1-10>
Issue 01 (2011-07-15)
NOTE
The RRPP ring can be activated only when both the RRPP ring and RRPP protocol are enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
69