MSI/Plessey Length Control
NOTE
Product Reference Guide
This feature specifies whether variable-length or fixed-length
decoding will be set for MSI/Plessey.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to
cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
You must now set the features MSI/Plessey Length 1 on page 444
and MSI/Plessey Length 2 on page 445 .
MSI/PLESSEY LENGTH CONTROL = VARIABLE-LENGTH
MSI/PLESSEY LENGTH CONTROL = FIXED-LENGTH
MSI/Plessey Enable
443