Codabar Length 1
Product Reference Guide
Length 1 is the minimum label length if in variable length mode, or
the first fixed length if in fixed length mode (see Codabar Length
Control on page 422
data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODABAR LENGTH 1 on page 423
below. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired label length. The selectable range
for this option is 003 to 050. Pad all single and double digit
numbers with leading zeroes to yield a three-digit entry (003-
050).
4. Complete the programming sequence by scanning the SWITCH
bar code.
) . Length includes the barcode's check and
SET CODABAR LENGTH 1
Codabar Enable
423