Beep On Ascii Bel - Datalogic Magellan 8300 Product Reference Manual

RS-232 Beep on ASCII BEL
Product Reference Guide
Enables/disables ability of scanner to beep (sound a good read
tone) on receiving an ASCII BEL (07 hex).
• Disable
• Enable
To enable/disable this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RS-232 BEEP ON ASCII BEL = DISABLE
RS-232 BEEP ON ASCII BEL = ENABLE
RS-232 Features
209