Rear Lift
Handle
Product Reference Guide
DO NOT attempt to lift the unit using the plastic edges, scale
frame, or any features other than the lift handles.
Figure 30. Using the Lift Handles
4. Lower the unit into the counter opening, ensuring that none of
the cables are pinched, pierced or crimped.
5. View the bubble level (if present
spider assembly to ensure the scanner is level. As shown in
Figure
31, the air bubble should appear fully within the circle
indicated. The air bubble can touch the circle, but must not
overlap it. Apply shims beneath the scanner bottom or adjust
the shelf to allow level installation.
1. The bubble level is present only on certain models.
Set-Up & Installation
Interior Lift Handle
1
) located on the scanner's
45