Led And Beeper Indications - Datalogic Magellan 8300 Product Reference Manual

LED and Beeper Indications

LED
DURATION
INDICATION
Scale at
Scale (Yellow) LED on steady
a
Zero
Scanner
Scanner (Green) LED on
a
Active
steady and dim
(Normal
Mode)
Scanner (Green) LED - bright
Good Read
flash
a
Indication
Program Scanner (Green) LED - Contin-
Mode uous flashing
Indication
Scanner (Green) LED flashes
Sleep Mode
slowly
Indication
Scanner (Green) LED 1-second
Host Dis-
off, 1/10-second on
abled
452
Scanner and Scale LEDs
The Scanner LED indicates scanner status, and the Scale LED (which
is in combination with the Scale push button) is primarily used to
show scale status (see Table 4).
Table 4. Scanner and Scale LED Indications
COMMENT
The scale is at rest and reads zero
weight. The scale is ready to weigh.
The scanner is ready for operation.
Scanning is immediately available.
Indicates a bar code has been read and
decoded.
Indicates the scanner is in Label Pro-
gramming Mode. Cycle power to exit
Programming Mode.
The scanner motor and/or laser have
automatically switched off and the unit
has entered Sleep Mode due to
extended inactivity.
Host has disabled scanning.
Magellan™ 8300/8400