Standard 2 Of 5 Check Character Transmission - Datalogic Magellan 8300 Product Reference Manual

Standard 2 of 5 Check Character Transmission

NOTE
404
Enables/disables transmission of an optional Standard 2 of 5 check
character.
This feature applies only when Standard 2 of 5 Check Character Cal-
culation on page 403
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
STANDARD 2 of 5 CHECK CHARACTER TRANSMISSION = DISABLE
STANDARD 2 of 5 CHECK CHARACTER TRANSMISSION = ENABLE
is enabled.
Magellan™ 8300/8400