Code 128 Length 1 - Datalogic Magellan 8300 Product Reference Manual

Code 128 Length 1

Product Reference Guide
Length 1 is the minimum label length if in variable length mode, or
the first fixed length if in fixed length mode (see Code 128 Length
Control on page 382
data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODE 128 LENGTH 1 on page 383
below. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired label length. The selectable range
for this option is 001 to 080. Pad all single and double digit
numbers with leading zeroes to yield a three-digit entry (001-
080).
4. Complete the programming sequence by scanning the SWITCH
bar code.
) . Length includes the barcode's check and
SET CODE 128 LENGTH 1
Code 128 Enable
383