I 2 of 5 Stitching
NOTE
Product Reference Guide
Enables/disables stitching for I 2 of 5 labels. When parts of an I 2 of
5 bar code are presented to the scanner with this feature enabled,
the bar code parts will be assembled by the scanner's software, and
the data will be decoded if all bar code proofing requirements are
met.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to
cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
I 2 of 5 Stitching operates using fixed lengths ONLY. I 2 of 5 Length 1
on page 396
and/or I 2 of 5 Length 2 on page 397 must be properly
configured for stitching to work.
Interleaved 2 of 5 (I 2 of 5) Enable
I 2 OF 5 STITCHING = DISABLE
I 2 OF 5 STITCHING = ENABLE
399