Codabar Start Stop Character Match - Datalogic Magellan 8300 Product Reference Manual

Codabar Start Stop Character Match

Product Reference Guide
Enables/disables the requirement that start and stop characters
match.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR START STOP CHARACTER MATCH = DISABLE
CODABAR START STOP CHARACTER MATCH = ENABLE
Codabar Enable
417