IBM Number of Host Resets
182
Specifies how many consecutive resets are processed before the
scanner starts a five-second period during which a user is allowed
to enter label-programming mode and configure the scanner.
To set the number of host resets:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET IBM NUMBER OF HOST RESETS on page
182. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired number of host resets. The select-
able range is 1-15 resets. Pad all single and double digit num-
bers with leading zeroes to yield a three-digit entry (001-
015).
Examples:
001 = 1 reset
005 = 5 resets
011= 11 resets
4. The scanner will automatically exit Programming Mode when
the appropriate amount of digits have been scanned
SET IBM NUMBER OF HOST RESETS
Magellan™ 8300/8400