Error Codes
NOTE
Product Reference Guide
If an error is detected, the scanner will sound a long low tone (for
one second) and alternately flash its LEDs, indicating a failure. Fol-
lowing the long low tone, an error code will appear on the 7-seg-
ment display (refer to
button will cause the scanner to sound a series of beeps corre-
sponding to that error code.
describes what these codes mean and what action should be taken
for each.
When troubleshooting, always remember to check all cable connec-
tions first before proceeding with other problem isolation steps.
Figure
40). Pressing the Volume/Tone Push
Table 2
on the following page
Error Codes
69