Ibm Transmit Labels In Code 39 Format - Datalogic Magellan 8300 Product Reference Manual

IBM Transmit Labels in Code 39 Format

NOTE
Product Reference Guide
This feature enables/disables scanner's ability to set a symbology
identifier for a specified label to Code 39 before transmitting that
label data to an IBM host. This applies to: Code 128, Code 93 and
Codabar for IBM Port 5B; Code 93 and Codabar for IBM Port 9B.
When enabled, this feature has no effect on IBM Port 17.
To enable/disable the IBM Transmit Labels in Code 39 Format fea-
ture:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
IBM TRANSMIT LABELS IN CODE 39 FORMAT = DISABLE
IBM TRANSMIT LABELS IN CODE 39 FORMAT = ENABLE
IBM Features
185