Msi Length Control - Datalogic Magellan 1500i Product Reference Manual

MSI

MSI Length Control

This feature specifies whether variable‐length or fixed‐length decoding will be set for MSI.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
020001(CR)
MSI Length Control = Fixed Length
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
Mode barcode.
ENTER/EXIT PROGRAMMING MODE
020000(CR)
MSI Length Control = Variable Length
247