Datalogic Magellan 8300 Product Reference Manual page 58

Hide thumbs Also See for Magellan 8300:

Table of Contents

Figure 31. Using the Bubble Level

Bubble Level

6. Re-install the Platter and verify that it is flush or just below

flush with the countertop. This is necessary to provide smooth

scanning from either direction. Make adjustments as needed

to align the platter with the counter by moving support rails

up or down, or consider installing screws in positions that will

allow their use in adjusting the unit's position. Ensure that

leveling is maintained if adjustments are made.

Failure to install a scanner/scale in a stable and level position will

inhibit weighing, calibration and zeroing operations. The platter MUST

make unobstructed contact with all of its supports for proper weighing

7. Once installation is complete, proceed with the

Verification on page 32

Models vary and

may not contain

a bubble level

procedures that follow.

Magellan™ 8300/8400

Magellan 8400