Shift Test (Metric) - Datalogic Magellan 8300 Product Reference Manual

Shift Test (Metric)

92
9. Increase the weight on the scale to 7.50 kg on the center of
the weighing surface and check that the display reads between
7.495 and 7.505 kg.
10. Remove the weights and verify that the display reads 0.000 kg.
You have completed the Increasing-Load Test (Phase 1).
The Shift Test checks to ensure that items placed anywhere on the
weighing surface of the scanner/scale are weighed properly. Refer
to Figure 50 when performing this test.
1. Place and remove in succession, a 5.0 kilogram load on the
center of each of the four quadrants (2, 3, 4, and 5 in Figure
50) and in the center (1) of the scanner/scale's weighing plat-
form. Verify that the display shows a reading of between 4.995
and 5.005 kg for each quadrant/center test and that the dis-
play returns to 0.000 between each load.
2. After verifying the accuracy of each quadrant and the center of
the weighing surface, remove all weight from the scale. You
have completed the Shift Test.
Figure 50. European Shift Test (Metric)
2 3
1
5 4
Magellan™ 8300/8400