Calibration Switch
LEGAL
NOTE
Product Reference Guide
This switch initiates the scale's calibration routine. A certified
weight set is needed to perform the scale calibration steps detailed
in Chapter 5, Calibration. This switch is not included in scanners
without scale modules.
Calibration Switch Seal
This seal allows you to secure the Calibration Switch access cover
and restrict access to the Calibration Switch. If the calibration seal is
broken or missing, you may be prohibited from operating the scale
without recertification. Check local and state requirements for spe-
cific restrictions.
Calibration Switch
A cover restricts access to the Calibration Switch to help guard
against unauthorized tampering when sealed. The Calibration
Switch is located just beneath the Spider in the location indicated in
Figure 54.
There are regulations that must be followed in order to ensure
compliance when operating a weighing device such as the scan-
ner/scale. Failure to observe and comply with these regulations
could result in legal action.
Figure 54. Calibration Switch
Spider
Calibration
Switch
Controls and Indicators
457