Standard 2 Of 5 Correlation - Datalogic Magellan 8300 Product Reference Manual

Standard 2 of 5 Correlation

Product Reference Guide
This feature enables/disables character correlation for Standard 2
of 5.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to
cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
Complete the programming sequence by scanning the SWITCH bar
code.
STANDARD 2 of 5 CORRELATION = DISABLE
STANDARD 2 of 5 CORRELATION = ENABLE
Standard 2 of 5 (Std 2 of 5) Enable
409