Datalogic Magellan 8300 Product Reference Manual page 533

Product Reference Guide
Standard 2 of 5
• Check character must be included in label data.
• Label length including check characters and excluding prefix
characters must meet requirements imposed by the main
scanner's fixed or variable label length control for this sym-
bology type.
• Prefix must be an ASCII character 's'.
• Example: 's0123456789'.
Codabar
• Check character must be included in label data.
• Label length including check character and excluding prefix
character must meet requirements imposed by the main scan-
ner's fixed or variable label length control for this symbology
type.
• Prefix must be an ASCII character '%'.
• Start stop character sets must meet the matching requirement
set forth by the scanner configuration item
Character Match
• Start stop character sets must be of the form ABCD/ABCD and
must be included in the label.
• Example: '%s$99.95s' (the lower case 's' at each end of the
example is a placeholder for the start stop character set).
Code 128
• Prefix must be an ASCII character '#'.
• Label length excluding prefix character must meet require-
ments imposed by the main scanner's fixed or variable label
length control for this symbology type.
• Function characters may be transmitted as a hexadecimal
value 8x. Where x correlates to function characters 1 thru 4 as
follows:
• x80 = function code 1
• x81 = function code 2
• x82 = function code 3
• x83 = function code 4
• For Code 128 programming labels the format is of the general
form '#/82nnnnn/r ' - /82 is hexadecimal 82 and /r is carriage
return.
• Example: '#Code_128.Test'.
.
Codabar Start Stop
521