a
62
4. Fully seat the new Vertical Scan Window into the window
channel, engaging it within the retention tabs. Reference
d and
Figure 36
5. Clean both sides of the new Vertical Scan Window using
a paper towel or lint free cleaning tissues dampened
with a mild, water-based glass cleaner. DO NOT use
abrasive cleaners or pads.
6. Tilt in the bezel to seat the two ears at the bottom cor-
ners of the bezel into their holes in the scanner and
push in on the top of the bezel to securely snap it in
place (see
Figure 36
is now complete.
L-Platter Vertical Scan Window Removal
1. Grasp the platter as shown in
from the scanner.
Figure 37. L-Platter Removal/Reinstallation
c.
Figure 36
b). Vertical Scan Window replacement
Figure 37
b
and gently lift it
(Obstruction)
Coin
Magellan™ 8300/8400