UPC-A Number System Character Transmission
NOTE
256
Enables/disables transmission of a UPC-A number system charac-
ter.
This feature MUST be enabled for IBM interfaces for proper function.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC-A NUMBER SYSTEM CHARACTER TRANSMISSION = DISABLE
UPC-A NUMBER SYSTEM CHARACTER TRANSMISSION = ENABLE
Magellan™ 8300/8400