Good Read Beep Volume - Datalogic Magellan 8300 Product Reference Manual

Hide thumbs Also See for Magellan 8300:

Table of Contents

Good Read Beep Volume

Selects the beeper volume upon a good read beep. There are five

selectable volumes, with each volume increment adding approxi-

mately five decibels to the previous level:

0 = Lowest Volume

1 = Medium-Low Volume

2 = Medium Volume

3 = Highest Volume

To set the Good Read Beep Volume:

1. Scan the SWITCH bar code.

2. Scan your selected volume bar code from this or the following

pages. You'll need to cover any unused bar codes on this and

the facing page to ensure that the scanner reads only the bar

code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

GOOD READ BEEP VOLUME = LOWEST

Magellan™ 8300/8400

Magellan 8400