Features; Baud Rate - Datalogic Magellan 8300 Product Reference Manual

RS-232 Features
RS-232 Baud Rate
NOTE
Product Reference Guide
This feature selects the baud rate required for sending and receiv-
ing data.
Single cable interfaces are limited to Baud Rate selections up to 19200.
They cannot communicate at Baud Rates of 38400 and up.
To specify the RS-232 Baud Rate:
1. Scan the SWITCH bar code.
2. Scan the desired baud rate from the bar codes below and on
the immediately following pages. You'll need to cover any
unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RS-232 BAUD RATE = 1200
RS-232 BAUD RATE = 2400
RS-232 Features
189