Codabar Require Quiet Zones
Product Reference Guide
When enabled, this feature requires that quiet zones (margins) be
present for Codabar labels. When disabled, quiet zones are
optional.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR REQUIRE QUIET ZONES = DISABLE
CODABAR REQUIRE QUIET ZONES = ENABLE
Codabar Enable
421