Enable EAN Two Label
Contact Customer Support for details about advanced programming for this
feature.
316
Enables/disables the ability of the scanner to decode EAN two-label
pairs.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN TWO LABEL = DISABLE
EAN TWO LABEL = ENABLE
Magellan™ 8300/8400