Scale Features; Scale Enable - Datalogic Magellan 8300 Product Reference Manual

Scale Features

Scale Enable

NOTE
Product Reference Guide
Use this feature to enable or disable scale operation.
Recalibration/recertification may be required when adding scale
functionality. Consult your local Weights and Measures authority.
If this feature is enabled the scanner will expect that it is to function
as a scanner-scale, and will indicate an error if it is not a scale-
equipped unit. See Chapter 4, Error Codes , for more information.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the two bar codes below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SCALE = DISABLE
SCALE = ENABLE
Scale Features
137