Symbology Programming
NOTE
Coupon Control
Product Reference Guide
If the scanner's interface type must be changed, always be sure that
interface configuration is the FIRST item scanned during a program-
ming session. (Selecting an interface type resets ALL other configu-
ration items — including symbology programming — to the factory
default for that interface type.)
Used to control the method of processing coupon labels.
Options are:
•
Disable coupon decoding
•
Enable UPC/EAN coupon decoding
•
Enable RSS coupon decoding
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
COUPON CONTROL = DISABLE
Symbology Programming
253