Unpacking - Datalogic Magellan 8300 Product Reference Manual

Unpacking

NOTE
Product Reference Guide
To unpack the unit:
• Inspect the package for signs of damage that may have
occurred during shipping. If damage is found, report it to your
carrier immediately.
• Lift out the accessory box containing the AC/DC Power Supply,
optional Remote Scale Display and cable (if present), and the
Quick Reference Guide.
• Remove the Quick Reference Guide and familiarize yourself
with the unit's controls and features. Leave the guide at the
checkstand when the installation is complete.
• Remove the protective packing and carefully lift the unit from
the carton. Be sure to save the box and all packing material. In
the event of failure, the unit must be returned to the factory in
its original packaging
• Carefully lift off the L-Platter as shown in
remove the protective foam pieces securing the weigh mecha-
nism. Set the platter back in place.
For added protection during shipment, the L-Platter is covered with a
tight-fitting layer of vinyl as shown in Figure 21 . This vinyl layer MUST
BE REMOVED before placing the unit into service.
.
Installation Overview
Figure 29 and
31