Code 128 Length 2
384
Length 2 is the maximum label length if in variable length mode, or
the second fixed length if in fixed length mode (see Code 128
Length Control on page 382
and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODE 128 LENGTH 2 on page 384
below. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired label length. A setting of 000 will
ignore this length (only one fixed length), otherwise, the
selectable range for this option is 001 to 080. Pad all single
and double digit numbers with leading zeroes to yield a three-
digit entry (001-080).
4. Complete the programming sequence by scanning the SWITCH
bar code.
) . Length includes the barcode's check
SET CODE 128 LENGTH 2
Magellan™ 8300/8400