Codabar Minimum Reads
Product Reference Guide
Specifies the minimum number of consecutive times a Codabar
label must be decoded before it is accepted as a good read.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on
the following pages. You'll need to cover any unused bar
codes on facing pages to ensure that the scanner reads only
the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
CODABAR MINIMUM READS = 1
CODABAR MINIMUM READS = 2
Codabar Enable
427