Datalogic Magellan 8300 Product Reference Manual page 35

MODEL(s)
8301/8401 Short Scanner
8302/8304 Medium Scanner or
8402/8404 Scanner/Scale
8302/8304 Medium Scanner or
8402/8404 Scanner/Scale
8303/8305 Long Scanner or
8403/8405 Scanner/Scale
8303/8305 Long Scanner or
8403/8405 Scanner/Scale
Product Reference Guide
3. Install the AC/DC Power Supply, the Remote Scale Display
cable (if Remote Display is used) and the interface cable(s)
observing the following:
Interface cables (and display cable, if applicable) should
be routed away from all highly inductive electrical
devices, like motors and conveyor belts, and even away
from the unit's power cable if possible.
Cables should be easy to remove in the event that
replacement is required. A little planning now will save a
lot of frustration later.
4. Connect and verify all system operations.
The scanner should be installed so that leading and trailing edges
of the L -Platter are flush with the countertop to enhance smooth,
slide-through scanning (reference the insert in
mind that the debris chutes on both sides of the platter provide the
necessary clearance for proper scale operation if you are installing a
scanner/scale (you won't need to provide an additional gap for
that).
Table 1. Cut-Out Dimension References
FLANGE / SHELF
TYPE
OPTION
Shelf
Shelf
Flange
Shelf
Flange
Counter Cutout
Figure 10). Keep in
DIMENSIONAL
REFERENCE
Figure 11
Figure 13
Figure 15
Figure 17
Figure 19
23