Standard 2 Of 5 Check Character Calculation - Datalogic Magellan 8300 Product Reference Manual

Standard 2 of 5 Check Character Calculation

NOTE
Product Reference Guide
Enables/disables calculation and verification of an optional Stan-
dard 2 of 5 check character.
If check character calculation is disabled, the risk is increased that a
misread can occur. When disabled, any check characters in a bar code
are treated as data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
STANDARD 2 of 5 CHECK CHARACTER CALCULATION = DISABLE
STANDARD 2 of 5 CHECK CHARACTER CALCULATION = ENABLE
Standard 2 of 5 (Std 2 of 5) Enable
403