Msi/Plessey Length 2 - Datalogic Magellan 8300 Product Reference Manual

MSI/Plessey Length 2

Product Reference Guide
Length 2 is the maximum label length if in variable length mode, or
the second fixed length if in fixed length mode (see Code 93 Length
Control on page 431
characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODE 93 LENGTH 2 on page 433
below. You'll need to cover any unused bar codes on this and
the facing page to ensure that the scanner reads only the bar
code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired label length. A setting of 000 will
ignore this length (only one fixed length), otherwise, the
selectable range for this option is 004 to 016. Pad all single
and double digit numbers with leading zeroes to yield a three-
digit entry (004-016).
4. Complete the programming sequence by scanning the SWITCH
bar code.
) . Length includes the barcode's check and data
SET MSI/PLESSEY LENGTH 2
MSI/Plessey Enable
445