MSI Length Control
This feature specifies whether variable-length or fixed-length decoding will be set for MSI.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
020001(CR)
MSI Length Control = Fixed Length
Product Reference Guide
Enter/Exit Programming Mode
020000(CR)
MSI Length Control = Variable Length
353