Addon Timer - Datalogic Magellan 8300 Product Reference Manual

Hide thumbs Also See for Magellan 8300:

Table of Contents

Addon Timer

Product Reference Guide

When addons have been selected as optional, this feature sets the

duration of time that the scanner can unsuccessfully look for an

addon before proceeding to read a bar code. Timer duration is

specified in 10ms increments.

To set the Addon Timer:

1. Scan the SWITCH bar code.

2. Scan the bar code, SET ADDON TIMER DURATION on page 335

below. You'll need to cover any unused bar codes on this and

the facing page to ensure that the scanner reads only the bar

code you intend to scan.

3. Scan the appropriate digits from the keypad in Appendix C

that represent the desired Addon Timer Duration. The select-

able range is 1-10, which is the timeout in 10-millisecond

increments. Pad all single and double digit numbers with lead-

ing zeroes to yield a three-digit entry (001-010).

Complete the programming sequence by scanning the SWITCH bar

SET ADDON TIMER DURATION

Other UPC/EAN Options

Magellan 8400