I 2 Of 5 Length 2 - Datalogic Magellan 8300 Product Reference Manual

I 2 of 5 Length 2

Product Reference Guide
Length 2 is the maximum label length if in variable length mode, or
the second fixed length if in fixed length mode (see I 2 of 5 Length
Control on page 395
characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET I 2 of 5 LENGTH 2 on page 397 below.
You'll need to cover any unused bar codes on this and the fac-
ing page to ensure that the scanner reads only the bar code
you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C
that represent the desired label length. A setting of 000 will
ignore this length (only one fixed length), otherwise, the
selectable range for this option is 002 to 050, even numbers
only. Pad all single and double digit numbers with leading
zeroes to yield a three-digit entry (002-050).
4. Complete the programming sequence by scanning the SWITCH
bar code.
Interleaved 2 of 5 (I 2 of 5) Enable
) . Length includes the barcode's check and data
SET I 2 of 5 LENGTH 2
397