Code 128 Enable - Datalogic Magellan 8300 Product Reference Manual

Hide thumbs Also See for Magellan 8300:

Table of Contents

Code 128 Enable

Enables/disables

the ability of the scanner to decode Code 128

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need

to cover any unused bar codes on this and the facing page to

ensure that the scanner reads only the bar code you intend to

3. Complete the programming sequence by scanning the SWITCH

1. Exception: The Code 128 symbology is always enabled with regard to

scanning/reading the special C128 programming bar codes provided

in this manual.

CODE 128 = DISABLE

CODE 128 = ENABLE

Magellan™ 8300/8400

Magellan 8400